檢測設備 首頁 > 公司簡介 > 檢測設備

 

我們的檢測設備 Our measure equipment

西德 ZEISS
三次元量床
CMM,ZEISS,Germany

瑞士 TRIMOS
二次元量床
2D Measuring machine,
TRIMOS,Switerland

 

 

煙霧測試(72小時)
Salt Spray Test (72 Hours)

目的 Objective
檢測鍍鎳支撐座表面抗鹽霧腐蝕知能力。
Detection of nickel-plating surface of support unit the ability of anti-salt spray corrosion.

 

說明 Manual

煙霧試驗是一種主要利用煙霧試驗所創造的人工類比鹽霧環境條件來考核產品或金屬材料耐腐蝕性能的環境試驗。
Salt spray test is a major use of salt spray test equipment created by the artificial analog to assess environmental conditions, salt spray product or metallic materials resistant to corrosion environmental tests.

人工類比鹽霧環境試驗是利用一種具有一定容積空間的試驗設備—鹽霧試驗箱,在其容積空間內用人工的方法,造成鹽霧環境來對產品的耐鹽霧腐蝕性能品質進行考核。
Artificial analogy environmental test using a certain volume of solace test equipment-salt spray test box. By artificial way to evaluation the product quality and resistance to salt spray environment.

在天然暴露環境下對某產品樣品進行試驗,待其腐蝕可能要1年,而在人工類比鹽霧環境條件下試驗,只要24小時即可得到相似的結果。
Exposure in a natural environment, a product sample under test, until their corrosion may take a year, while in the artificial environment, under the conditions of salt spray test analog, as long as 24 hours, you can get similar results.

 

轉向往復精度測試 
Axial positioning repeatability test

 

說明 Manual

本公司生產之C5級支撐座,採用高精密度斜角滾珠軸承,搭配精心研製軸向預壓,不僅使整個系統剛性提昇,更加使機構之軸向往復精度和定位精度表現優異,為高精度的設備或機構不可或缺之關鍵,並充分表現小小螺絲釘的角色。
The C5 grade support unit use precision angular contact ball bearings and with axial reload. It is not only can enhance the rigidity for the system, but also can have better positioning repeatability and positioning accuracy for machinery. It is indispensable for high accuracy equipment or machinery.

 

滑台推立測試
Thrust Testing

 

目的 Objective
測試固定端的軸承啟動扭力與滑台推力兩數據之結果(如表下),以達到軸承於適當預壓內之最佳啟動扭力數值的管控,其優點在使用相同馬達條件下,可得到最佳扭力輸出值。
In order to obtain optimal bearings starting torque. It is very important to control fixed-side support unit in appropriate preload. Under identical motor running condition. It will get optimal starting torque value. Following are results.

 

備註 Note

1.軸承無預壓或預壓不足,會造成軸向產生間隙及剛性不足
There are axial clearance and weakness rigidity problem for bearings without or insufficient preload.

2.軸承預壓太重會造成啟動扭力飆高,致使馬達有效輸出值降低,並會使軸承於運轉中溫度快速上升,大幅度低軸承使用壽命。
Too great a preload on bearing can lead to overheating, and increase starying torque of the bearing. Therefore, It lead to reduce out efficiency for motor operation. It also causes increasing bearing temperature and reducing bearing life.

 

軸承壽命測試
Bearings Life Testing
目的 Objective

實際了解各品牌軸承使用壽命。
To get results of bearings life for various brands.

 

備註 Note

軸承壽命在失效數據的蒐集上耗時較久,不易依正常的使用條件快速地來獲得。因此對予軸承施加軸向最大負荷推力,在短時間內蒐集軸承的失效數據予以推估,並分析各品牌軸承壽命的變化。
It needs a long time to get the results in normal condition. This test adopted to force maximum axial load on bearings for various brands to get the results in short time.
Accordingly, this variation in life is considered statistically, and calculated life test results.